Check UP Board Result of All years (2000 to 2016)

For check previous years Results  (2000 to 2016) of UP Board High School & Intermediate  Click Here
          or Visit http://upmspresults.up.nic.in/HSSearch.aspx  
Thanks for Visiting Here

How to Share Internet Connection by Using Bridging Method

Dear Friends...
                    Today I am going to tell you that how to share Internet Connection by Using Bridging Method.

Advantage of Bridging :-
                               Suppose you use Internet in your PC by Mobile data or Data Card etc. And you want to share Internet so that you could use Internet in more PCs or Mobiles at the same time. Then you can use this method.
       Friends for use this method ,  you need 2 source for Access/Share Internet. One for access Internet & 2nd for share Internet.

• For Access Internet you can use :- Mobile Internet , Data Card , Dongle , Wi-fi , LAN Cable etc.
• For Share Internet you can Use :- Switch or Wi-Fi Router(ADSL Router)  

                  Suppose I have Air-tel 4G Dongle and I want to use Internet more than 2 Computers at the same time. And I want to share Internet Using ADSL Router or Switch. So first I will have to Connect Dongle with my PC & then I connect ADSL Router or Switch with my PC so that I could share Internet.
           Now I have Connected Both Lets Check.
           1.type "ncpa.cpl" in run Command & press enter button.

2.Now you can see it is showing two Connection 1st Enternet 1 that is Connect with ADSL Router/Switch & 2nd Ethernet 2 ( Airtel 4G ).

3.Now open Command prompt & type "ipconfig /all" Now note that Both Connections IP Address.

4. its Ethernet 2 means Airtel dongles IP note IP address. For Fill it Manual IP in Both Connections.

5.Now Put the Manually IP address in Ethernet 1.

6.Now Put the IP address of 2nd Ethernet in 2nd Ethernet and Ok  & Close it.

7.Now again type "ncpa.cpl" in Run Command.

8. Salect Both and then Right Click.

9.Click at Bridge Connection.

10.Now you can see you have successfully Shared the Internet Connection using Bridging method.

11.Now if were using Switch then just you can share Internet by LAN Cables and if you were using ADSL Router for share Internet then you share Internet by Wi-Fi.


Hope you like this Post.So Please don't forget to follow , like & Share.
Thanks for Visiting Here.

How to Configure Airtel/Jio Wifi Dongle/Router.

Dear Friends.
          This time lots of people have 4G wi-fi dongle. Some time we forgot the password of wi-fi dongle , or we want to change our wi-fi dongle's SSID & Password.So  I am going to tell you how you can configure Wi-fi dongle in few seconds.So lets start......

1. Connect your Dongle with PC by Micro USB Cable.
                                       
                                         


2.Now Just Click on your Computer Icon , Now you can see here is showing your Dongle setup.Open it.

3.Now Install this setup by just Double click on auto-run file.

4.After Installing this Setup . You Can see it on your Desktop.

                                      

5.Now open Command Prompt.you can also open it by just typing CMD in run command.

6.Now type "ipconfig" in command prompt & press Enter button.

7.Now just check Default gateway IP. & open Internet Explorer.

8.Type Default gateway IP in internet Explorer & Press Enter Button.

9.Now it will ask for password & username. Default Username is :- "admin" , & Password is also "admin", in some types of dongle or routers default password is :- "password".
                                 
                                     

10.Now just click on Setting option.

11.Now click at Wi-Fi settings.

 12.From here you can see your wi-fi SSID & Password.You can also change your wi-fi dongle password &

Hope you like this post.Don't forget to follow , like & share this post.
Thanks for Visiting here.